Low-temperature self-regulating heating tape HLM parallel type of protection against freezing and maintain a predetermined temperature of pipelines, tanks, not subjected to steaming. Including for pipes of small diameter for domestic use or, for example, such as gas analyzers and impulse tubes.
The parallel design of the self-regulating cable allows you to cut the tape of the desired length directly on the object, while the operations of sealing the terminals and splicing are carried out on the spot, without prior calculations. Sealing of inputs is made by means of the corresponding sets of fittings purchased separately. There is no risk of overheating or burnout of the tape during self-dissection or when it passes through the insulation layer. The heat release of the tape is self-regulated in response to changes in its temperature.
CERTIFICATION:
Fire safety certificate C-RU.nB54.B.00055
Certificate of conformity ROSS RU. AG23.B07487
Certificate of conformity with ROSS RU explosion protection marking РОСС RU.0001.11МГ08
Certification for compliance with other national standards is available on request
For more details on the technical characteristics of the self-regulating heating tape HLLE can be found in the technical documentation by request.
| Type | Linear power, W/m | Supply voltage, V | Shell type |
|---|---|---|---|
| 11HLM2-CT | 11 | 2 | PVC compound |
| 17HLM2-CT | 17 | 2 | PVC compound |
| 23HLM2-CT | 23 | 2 | PVC compound |
| 31HLM2-CT | 31 | 2 | PVC compound |
| 11HLM2-CF | 11 | 2 | fluoropolymer |
| 17HLM2-CF | 17 | 2 | fluoropolymer |
| 23HLM2-CF | 23 | 2 | fluoropolymer |
| 31HLM2-CF | 31 | 2 | fluoropolymer |
On request, the self-regulating heating tape can be supplied as ready-made heating sections with mounting ends of the required length. A complete set of necessary accessories for the installation of the heating cable is supplied.
